148,00€
Isolated programmable by DIP SWITCH converter for AC current signal , type of analogic input : From 0-20A (Iac) – To 0-30A (Iac)
Input for AC current signal
Build-in pluggable cross connector
Measure by Hall effect transducer
Input range configurable by DIP-switches
True Root Mean Square (TRMS) measure
Isolated power supply source for passive loads on output
Voltage or current output configurable by DIP-switches
Galvanic isolation at 2000 Vac
Good accuracy and performance stability
EMC compliant – CE mark
DIN rail mounting in compliance with EN-50022 and EN-50035
The converter DAT 5023Iac is designed to measure the TRMS value of the AC current signal from 0÷5 A to 0÷60 A applied on its input providing a voltage or current output signal.
The user can program the input and output ranges by the proper DIP-switches available after opening the suitable door located on the side of device (see “Input range tables” and “Output ranges table” sections).
The regulation of Zero and Span values is made by the ZERO and SPAN potentiometers located on the top of device.
The 2000 Vac isolation between power supply and output eliminates the effects of all ground loops eventually existing and allows the use of the converter in heavy environmental conditions found in industrial applications.
The measure of the input signal is executed by a cross connector and a Hall effect transducer; this allows to isolate the input side from the output and power supply.
The DAT 5023Iac provides on the output side an auxiliary supply source to connect both active and passive loads.
The device is available in three versions (A, B and D) in function of the input current value ( refer to “Technical specification” section).
It is housed in a plastic enclosure of 27.5 mm thickness suitable for DIN rail mounting in according to EN-50022 and EN-50035 standards .
MDR-20-24 
