Features
Asynchronous serial data transmission
Automatic baud-rate fitting up to 115.2 Kbps
Distance up to 1200 m
Point to point connection or multipoint connection up to 32 modules
DC or AC power supply
Galvanic isolation on all ways
RS232 connection on DB9 or removable terminals
UL / CE mark
Suitable for DIN rail mounting in compliance with EN-50022
General Description
The device DAT3580 is an isolated interface converter between asynchronous serials lines RS232 and RS485 or RS422 that guarantees a full isolation between power supply, serial line RS-232 and serial line RS-485 or 422 removes eventual ground-loop effects, allowing the use of the device even in the heavy environmental conditions.
It is designed to operate either on serial interface RS-422 full-duplex 4 wires or RS485 half-duplex 2 wires, with a baud-rate transmission up to 115.2 Kbps.
The transmission is asynchronous without settings of protocol, data format and baud rate.
On the line RS-232 are not necessary handshake commands (RTS, CTS, etc..) to control the baud rate.
DAT3000 series devices are designed to be easily mounted on DIN rail, optimizing the space encumbrance. Whereas the thermal dissipation allows it, the devices can be mounted side by side, allowing a relevant reduction of space requiring.
The connections are made by means of removable screw terminals, to simplify the handling of the devices.
The DAT 3580 is in compliance with the Directive UL 61010-1 for US market and with the Directive CSA C22.2 No 61010-1 for the Canadian market.
The device is housed in a rough self-extinguishing plastic container which, thanks to its thin profile of 22.5 mm only, allows a high density mounting on EN-50022 standard DIN rail.